If you don’t know how to repair a bouncy castle, your heart may stop at your chest when you first see the damage. But a broken bouncy castle is usually not catastrophic, and once you learn how to mend a bouncy castle, it becomes a simple matter.

Tools to be prepared before repairing: scissors, glue, spare PVC cloth, washable marker pen.

1.Find the repair material package provided by the manufacturer, take out a piece of spare PVC cloth, after scrubbing and drying, use scissors to cut out a shape that can cover the damaged area, preferably with a round edge, and it must be large enough! If the tear length is too long to use a circle, you can use a square patch, but make sure the edges are rounded, as the corners of a square peel off easily!

2.Clean the PVC repair material and the damaged area, and make sure the repaired area is clean and dry before repairing. Apply special glue to the spare PVC material that has been cut and the damaged part (choose the rough side on the opposite side when applying the spare material), and use a small brush to apply an appropriate amount of glue on the warped edge, press it flat after a short pause, and stick it firmly .

3.Use a hair dryer to heat the joint, the method is to use the hot air of the hair dryer to stick the joint together quickly and firmly.

4.Wait for 5 minutes until the adhesive part does not stick to your hands, and then squeeze it properly to make the adhesive part fit together better.

5.After the repair is complete, please deflate the inflatable product and let it stand for at least 2 hours before using it.

Written by Doris from East-inflatables